Compact red dot sight AIMPOINT MICRO H-2

  • Lightweight
  • Fully waterproof
  • See-through flip-up lens covers to make sure your optical lenses are always dry and clean
Made in Sweden
Warranty 10 years
SKU: Aimpoint Micro H-2 Category:


With a redesigned and reinforced house body, as well as flip-up covers protecting the lenses, the Micro H-2 can withstand all types of environmental conditions. And thanks to new optical lenses and cutting edge lens coatings, the optical performance and the shape and clarity of the red dot are radically improved.

The Aimpoint Micro® H-2 is also available in different alternative configurations:
– Aimpoint Micro® H-2 with Blaser Original Saddle Mount
– Aimpoint Micro® H-2 with Leupold QR Mount
– Aimpoint Micro® H-2 with TIKKA T3 Mount
– Aimpoint Micro® H-2 with SAKO Optilock Mount

Integral Weaver- and Picatinny-style base allows easy attachment
Improved optics to increase the light transmission, the red dot is more distinct and clear
Patent pending mount is keyed to the sight body to absorb recoil
Precision adjustment for windage and elevation: top of protective caps fits into holes on adjustment screws – no other tool required

Technical details:

Optical Specifications
Operating principle: Reflex collimator sight with LED
Optical magnification: 1x
Aiming dot size: 2 MOA
Dot intensity: Visible against a background luminance of 0.1 to 55 000 lx
Dot color: Peak Wavelength: 650 ± 10 nm
NVD compatible: No
Optical coating: Anti-reflex, all surfaces and multi-layer.
Clear aperture: 18 mm
Eye relief: Unlimited

Power Source
Battery type: 3V lithium battery, type CR2032.
Battery life: Daytime use: 50 000h (over 5 years of continuous use)
Power intensity: 1 Off position and 12 daylight settings

Physical Specifications
Length sight only: 2.6″
Length std conf: 3.06″
Width: 1.6″
Height sight only: 1.4″
Height std conf: 1.8″
Weight sight only (incl battery): 94 g (3,3 oz)
Weight std conf: 130 g (4,6 oz) incl lens covers and mount
Housing material: High strength Aluminum
Housing finish and color: Semi-matte black
Material mount and spacer std conf: High Strength Aluminum
Surface treatment: Anodized, semi-matte
Height of optical axis – sight and mount: 20 mm (3/4″) over top surface of Picatinny/Weaver Rail
Height of optical axis – sight, mount and Micro spacer XX: Spacer low: 1.9″ over top surface of Picatinny/Weaver Rail
Height of optical axis – sight, mount and Micro spacer ZZ: Spacer high: 2.3″ over top surface of Picatinny/Weaver Rail
Adjustment: Range ±1 m at 100 meters (±1 yds at 100 yds) in windage and elevation, 1 click = 13 mm at 100 meters = 10 mm at 80 meters = 7/16″ at 100 yds

Environmental Specifications
Temperature range operation: -30°C to 60°C (-20°F to 140°F)
Temperature range storage: -51°C to 71°C (-60°F to 160°F)
Temperature shock: Operable after a temperature shock between -45°C and +71°C. Duration: 4h of Hot +71°C, 4h of Cold -45°C. Cycling: 3 times
Humidity: Operates despite the humidity. Limits: RH: 95%, Temp: 20ºC to 50 ºC, cyclic
Immersion, static: Submersible to 15 ft (5 m)
Shock: The unit is operable before and aftershock. Limits: X-axis: 500 g, 0.7 – 1.1 ms (3 shocks), Y-axis: 40g ±4g, 11 ±1ms (2 shocks in each direction, Z-axis: 40g ±4g, 11 ±1ms, 2 shocks in each direction. Functional during exposure (room temperature)
Vibration: The unit operates despite vibration. Limits: Vibration, sinusoidal in a frequency range of 10-150 Hz. Frequency: 10-30 Hz, ±1.587 mm, Frequency: 30-150 Hz. 5.75 g, 1 octave/min
Chemical resistance: Withstands occasional contamination of: Hydraulic oil (FSD 8407, Tryckolja 021), Lubricating oil (FSD 8127, Motorolja 5W/30), Lubricating oil (FSD 8220, Smörjfett 220), Lubricating oil (Break Free), Fuels (FSD 8612, Diesel fuel oil), Solvents/cleaning (FSD)

Additional information



There are no reviews yet.

Be the first to review “AIMPOINT Micro H-2”

Your email address will not be published. Required fields are marked *

Featured Products

Best Selling Products

Latest Products

Top Rated products

You've just added this product to the cart: